POCE Laboratory
POCE Baoce reached the international laboratory testing and Certification Center is located in Shenzhen Baoan District City Shiyan Hongfa science and Technology Park, covers an area of more than 2000 square meters, has a EMC laboratory safety laboratory, environmental laboratory, chemical laboratory, RF laboratory, optics laboratory, laboratory cell.
POCE Baoce detection has been in strict accordance with international standards of construction safety (safety), electromagnetic compatibility (EMC) and the reliability of environmental testing laboratories equipped with German ROHDE.
The scope of services:
|
Electromagnetic interference (EMI) test report, countermeasures |
The EMC regulations, standard consultation |
|
|
Electromagnetic susceptibility (EMS) test report, countermeasures |
Product certification service, to obtain national EMC certification |
Laboratory test for |
The EMC test project:
|
conduction velocity |
Conduction Test |
Rapid transient detection of electric pulse |
Electrostatic Fast Transient/Burst Test |
|
radiation detection |
Radiated Disturbances |
Lightning (surge) detection |
Surge Test |
|
Power disturbance detection and magnetic field radiation detection |
Disturbance Power Test and Magnetic Emission Test |
Anti-interference test
|
EMS Test Area |
|
ESD detection |
Electrostatic discharge Test |
|
|
Safety Laboratory
Safety test items:
|
input test |
Humidity test |
Ball impact test |
Touch Current |
|
Label durability test |
Creepage distance and clearance |
Drop Test
|
Electric Strength Test
|
|
Capacitor discharge test |
working voltage
|
Stress reduction test
|
Strife test
|
|
The current limiting circuit test |
STRAIN RELIEF TEST
|
Loading Test
|
Heat resistance and flame resistance |
|
Limit power test |
stability test
|
Direct torque testing equipment |
Ball pressure test
|
|
Protective earthing impedance |
25N stability test
|
heating test |
Radiation toxicity test, similar risk |
Environmental Laboratory
Environmental test items and standards:
|
Test Item |
testing standard |
|
Cooling test |
IEC60068-2-1 |
|
High Temperature Test |
IEC60068-2-2(GB2423.2) |
|
impact test |
IEC60068-2-27 |
|
Alternating (1212 hour cycle) |
IEC60068-2-30(GB2423.4) |
|
Salt spray, cyclic (sodium) |
IEC60068-2(GB2423.18) |
|
Shock (Xuan Bo) |
IEC60068-2-6(GB2423.10) |
|
hammer test |
IEC60068-2-75(GB2423.55) |
|
Dustproof and waterproof grade test |
IEC60529(GB4208)IP |
Chemical Laboratory
In accordance with national environmental regulations and standards to provide testing services to the content of harmful substances, so that products meet the requirements of related laws and regulations, so as to win the local market. Physical and chemical analysis laboratory tests including electronic detection of harmful substances, toy safety testing, textile chemical inspection, material analysis, materials in contact with food safety testing, cosmetics safety testing, REACH regulations and environmental monitoring and other projects, to provide the most professional service for customers, and help enterprises to develop a comprehensive program of hazardous substances.
GC-MS
The GC-MS instrument can realize fast and high sensitivity, high accuracy, high sensitivity of ion source, large capacity differential exhaust system, high-speed scanning control technology and high precision four quadrupole mass filter and high configuration can achieve highly reliable data, coverage analysis field is very wide, can realize the testing items of Phthalates, AZO etc..
ICP
ICP-OES
The main use of geological, environmental, chemical, biological, pharmaceutical, food, metallurgy, qualitative, sample elements in agriculture and other aspects of quantitative analysis.
Detection range: Determination of metal elements and all metal elements.
Wavelength range: 160-800nm wavelength continuous coverage, no breakpoint.
The detection limits of most elements can reach 0.01xppm level.
Main features: 1., stability can be continuous and rapid determination of multi elements, high precision.2. temperature gasification center is as high as 10000K sample can be fully gasified, accuracy is high the.3. curve has a good linear relation, and linear range of.4. and computer software with directreading results, convenient and quick.
ICP-MS
Inductively coupled plasma mass spectrometry (ICPMS) with high sensitivity, high resolution, low detection limit (detection limit of sub grade PPT), less interference and strong interference, and has extraordinary flexibility (the valence of elements was analyzed by using IC/LC and other instruments) and other advantages, is the most reliable analysis of trace elements. The effective detection methods, widely used in geology, semiconductor, pharmaceutical, food, environmental, nuclear industry and so on.
Optical Laboratory
Single optical inspection categories, standard and project:
Voluntary LED Energy Star certification, energy star (Energy Ster), is a dominated by the U.S. government, mainly for consumer electronics products, energy saving plans. The Energy Star Program in 1992 by the U.S. Environmental Protection Agency (EPA) and the U.S. Department of energy (DOE) started, the purpose is to reduce the energy consumption and to reduce greenhouse gas emissions. The plan was Australia, Canada, Japan, Taiwan, New Zealand and the European Union adopted. The plan is voluntary, energy star standards are usually more than the U. S. Energy Star 20-30%. the first products of this program is computer and information appliances, and then gradually extended to the motor, office equipment, lighting home, and so on.
|
IES LM-79-08 |
IES LM-80-08 |
LightingFacts |
Non directional household Erp certification |
|
Integral ball - spectral radiation plan |
The distribution of spectral radiation plan |
distribution photometer |
Imaging luminance meter |
|
Photometric test |
Electrical tests |
Life Test |
other requirements |
|
Color temperature, luminous flux |
Power, voltage
|
Fast switching test
|
ambient temperature |
Battery Laboratory
Battery test project:
|
Battery test project:
|
Mechanical Tests
|
Electrical tests
|
|
Altitude simulation test
|
Vibration test
|
Rated capacity test |
|
fire exposure testing of The combustion test of projectile design evaluation Forced internal short circuit test Mechanical Tests Package Drop Test |
Explosion proof test |
